Aluminum 7.5m Suspended Working Platform
Aluminum 7.5m Suspended Working Platform is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references 7.5m, 1.8kw. These values should be confirmed against the final supplied configuration and destination power supply.
7.5m Aluminium Suspended Rope Platform 2 X 1.8kw Kinerja Stabil Daya
Keterangan:
Pin-Type Suspended Working Platform gampang dibongkar lan digabung. Bisa nambah efisiensi kerja kanggo buruh.
Aplikasi:
1. Bangunan dhuwur: Dekorasi, konstruksi kanggo tembok eksternal, instalasi tembok tirai lan eksternal
komponen, ndandani, mriksa, pangopènan lan pangopènan kanggo tembok njaba.
2. Proyek gedhe-gedhe: konstruksi, ndandani lan pangopènan kanggo tangki gedhe, cerobong asep, bendungan, jembatan,
derrick.
3. Kapal gedhe: welding, cleaning and painting.
4. Billboard: billboard instalasi gedung bertingkat tinggi.
Parameter Teknis
| Model No. | ZLP800 | |
| Dipun Rating (kg) | 800 | |
| Kecepatan ngangkat (m / min) | 8 ~ 10 | |
| Motor listrik (kw) | 2 × 1.8 50HZ / 60HZ | |
| Brake torsi (Km) | 16 | |
| Sudut tali baja nyetel sawetara (°) | 3 ° - 8 ° | |
| Jarak antarane rong tali baja (mm) | ≤100 | |
| Nilai regangan ngarep balok (mm) | 1500 | |
| Platform Suspending | Ngunci | Aluminium alloy |
| Nr.Of rack platform | Rak tunggal | |
| Nr.Of platform | 3 | |
| L × W × H (mm) | (2500 × 3) × 690 × 1180 | |
| Bobot (kg) | 410 Kg | |
| Mekanisme penundaan (kg) | 2 × 175 Kg | |
| Kélangan (kg) opsional | 25 × 40pcs | |
| Diameter tali baja (mm) | 8.6 | |
| Max Lifting height (m) | 300 | |
| Kecepatan rotasi motor (r / min) | 1420 | |
| Tegangan (v) 3PHASES / SINGLE PHASE | 220V / 380V / 415V, 50 / 60Hz (khusus) | |
Keuntungan kompetitif:
1. Sejatine njamin safety urip nalika nggarap Aerial
Kunci safety nyepetake tali baja kanthi cepet nalika platform mlentah digantung utawa tali baja metu saka hoist; Sistem kontrol elektro dirancang karo proteksi bocor, proteksi over-heat, proteksi overload saiki lan stop brake;
Kawat tali baja kualitas apik, tali safety lan kabel.
2. Performa stabil: mundhakaken lan ngisor mudhun kanthi lancar
3. Desain modular. Gampang kanggo mbongkar, ngumpulake operasi lan njaga.
4. Ngangkat dhuwur bisa disetel miturut requirement (Maksimum 300 Meter)
5. Tegangan lan frekuensi bisa diatur (220V / 380V / 415V lan liya-liyane)
6. Platform sing digantung kanggo panggunaan khusus bisa disesuaikan (bunder, bentuk L, bentuk U, dll)
7. Profesional kualitas, competitive price, cepet pengiriman, layanan apik.
Deskripsi Produk Rinci
Diperkeni Beban: 800kg
Ngangkat cepet: 8-10
Max.lifting Height: 300m
Motor Daya: 2 X 1.8kw
Diameter Of Steel Wire: 8.6mm
Bobot Counter: 25 X 40pcs
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our platform kerja sing dilereni, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.