Aluminum 7.5 M ZLP1000 Suspended Working Platform
Aluminum 7.5 M ZLP1000 Suspended Working Platform is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references zlp1000, 1000 kg, 7.5 m. These values should be confirmed against the final supplied configuration and destination power supply.
1000 kg 7.5 mx 3 Atal Aluminio Aleazio ZLP1000 Lan Plataforma Iraungita
deskribapenak
aplikazioak:
1. Goi-mailako eraikinaren kanpoko horma garbitu eta mantentzea.
2. Kanpoaldeko hormako pintura, apainketa eta zaharberritzea.
3. Instalazio-proiektuak eta goi-mailako eraikinaren kanpoko hormak eraikitzeko beste eraikuntza batzuk.
4. Itsasontzia, dorrea, zubia, presak eta tximini handiak aireko lanean.
5. Instalatu eta mantendu goi-mailako eraikineko igogailu hoistway, itsasontzien industria, ontzi itsasontziz,
Ontzi soldadurak.
Parametro Teknikoa
| Jabetza Modeloaren zenbakia. | ZLP1000 | |
| Karga nominala (kg) | 1000 | |
| Igogailua abiadura (m / min) | 8 ~ 10 | |
| Motorearen potentzia (kw) | 2 × 2.2 50HZ / 60HZ | |
| Brake momentua (Km) | 16 | |
| Soka koroa angeluaren egokitze-tartea (°) | 3 ° - 8 ° | |
| Sokaren bi sokaren arteko distantzia (mm) | ≤100 | |
| Beheko tarte motaren arabera (mm) | 1500 | |
| Plataforma etetea | blokeatzea | Aluminiozko aleazioa |
| Nr. Plataforma plataforma | Banako rack | |
| Nr.Of plataforma | 3 | |
| L × W × H (mm) | (2500 × 3) × 690 × 1300 | |
| Pisua (kg) | 455 Kg | |
| Mekanismoa etetea (kg) | 2 × 175 Kg | |
| Counterweight (kg) aukerakoa | 25 × 44pcs | |
| Altzairu soken diametroa (mm) | 8.6 / 9.1 | |
| Gehienezko altuera altxatzea (m) | 300 | |
| Motorearen biraketa abiadura (r / min) | 1420 | |
| Tentsioa (v) 3FASES | 220V / 380V / 415V | |
Deskribapen zehatza Deskribapena
Materiala: aluminio aleazioa
Kolorea: zilar
Tentsioa: 380V / 415V / 440V / 220V, 50 / 60Hz (Pertsonalizatu daiteke)
Igogailua: 2.2kw
Altuera altxatzea: 300 Mts (gehienez).
Soka altzairuzko diametroa: 9,1 mm
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our lan-plataforma eten egin da, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.