L-shaped Suspended Working Platform for Facade Painting
L-shaped Suspended Working Platform for Facade Painting is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references ZLP630, ZLP800, ZLP1000. These values should be confirmed against the final supplied configuration and destination power supply.
Stålmalet / Hotgalvaniseret / Aluminium ZLP630 / ZLP800 / ZLP1000 L Formet Ophængt Platform Til Vægmaleri
Standard enhed: 2 stk. Hejs, 2 stk sikkerhedslås, 1 stk elektrisk kontrolboks, 4 ruller af ståltov, 1 rulle af sikkerhedstov, 1 rulle kabel, modvægt.
Alternativ enhed: Væg mod ruller, hjulophæng med hjulophæng. Overbelastning, anti-svingningsanordning, trådstangsvindler, forlængelser, platformtag osv.
| Ejendomsmodel nr. | ZLP630 | ZLP800 | ZLP1000 | |
| Nominel belastning (kg) | 630 | 800 | 1000 | |
| Løftehastighed (m / min) | 9 ~ 11 | 8 ~ 10 | 8~10 | |
| Motorkraft (kw) | 2 × 1,5 50 Hz / 60 Hz | 2 × 1,8 50 Hz / 60 Hz | 2 × 2.2 50HZ / 60HZ | |
| Bremsemoment (Km) | 16 | 16 | 16 | |
| Justeringsområde for ståltovets vinkel (°) | 3 ° - 8 ° | 3 ° - 8 ° | 3 ° - 8 ° | |
| Afstand mellem to ståltov (mm) | ≤100 | ≤100 | ≤100 | |
| Nominel strækning af frontstråle (mm) | 1500 | 1500 | 1500 | |
| Suspension platform | Låsning | Aluminiumslegering | Aluminiumslegering | Aluminiumslegering |
| Nr.Of platform rack | Single rack | Single rack | Single rack | |
| Nr.Of platform | 3 | 3 | 3 | |
| L × B × H (mm) | (2000 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | |
| Vægt (kg) | 375 kg | 410 kg | 455 kg | |
| Suspension mekanisme (kg) | 2 × 175 kg | 2 × 175 kg | 2 × 175 kg | |
| Modvægt (kg) valgfri | 25 × 36pcs | 25 × 40pcs | 25 × 44pcs | |
| Diameter af ståltov (mm) | 8.3 | 8.6 / 9.1 | 8.6 / 9.1 | |
| Max Løftehøjde (m) | 300 | 300 | 300 | |
| Motorrotationshastighed (r / min) | 1420 | 1420 | 1420 | |
| Spænding (v) 3PHASES | 220V / 380V / 415V | 220V / 380V / 415V | 220V / 380V / 415V | |
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our ophængt arbejdsplatform, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.