L-shaped Suspended Working Platform for Facade Painting
L-shaped Suspended Working Platform for Facade Painting is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references ZLP630, ZLP800, ZLP1000. These values should be confirmed against the final supplied configuration and destination power supply.
Stahl gemalt / heißes galvanisiertes / Aluminium ZLP630 / ZLP800 / ZLP1000 L-förmige verschobene Plattform für Wandbild
Standardgerät: 2 Stück Hebezeug, 2 Stück Sicherheitsschloss, 1 Stück Elektroschaltkasten, 4 Rollen Stahlseil, 1 Rolle Sicherheitsseil, 1 Rolle Kabel, Gegengewicht.
Alternatives Gerät: Wand gegen Rollen, Räder für Aufhängungsmechanismen. Überlastabschaltung, Antischwinger, Drahtwickler, Verlängerungen, Plattformdächer usw.
| Eigenschaft Modellnr. | ZLP630 | ZLP800 | ZLP1000 | |
| Nennlast (kg) | 630 | 800 | 1000 | |
| Hubgeschwindigkeit (m / min) | 9 ~ 11 | 8 ~ 10 | 8~10 | |
| Motorleistung (kw) | 2 × 1,5 50 Hz / 60 Hz | 2 × 1,8 50 Hz / 60 Hz | 2 × 2,2 50HZ / 60HZ | |
| Bremsmoment (Km) | 16 | 16 | 16 | |
| Stahlseilwinkel-Einstellbereich (°) | 3 ° - 8 ° | 3 ° - 8 ° | 3 ° - 8 ° | |
| Abstand zwischen zwei Stahlseilen (mm) | ≤100 | ≤100 | ≤100 | |
| Nennweite des Frontbalkens (mm) | 1500 | 1500 | 1500 | |
| Plattform aufhängen | Sperren | Aluminiumlegierung | Aluminiumlegierung | Aluminiumlegierung |
| Nr.von Plattformregal | Einzel Rack | Einzel Rack | Einzel Rack | |
| Nr.der Plattform | 3 | 3 | 3 | |
| L × B × H (mm) | (2000 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | |
| Gewicht (kg) | 375 kg | 410 kg | 455kg | |
| Suspendiermechanismus (kg) | 2 × 175 kg | 2 × 175 kg | 2 × 175 kg | |
| Gegengewicht (kg) optional | 25 × 36pcs | 25 × 40pcs | 25 × 44pcs | |
| Durchmesser des Stahlseils (mm) | 8.3 | 8.6 / 9.1 | 8.6 / 9.1 | |
| Max Hubhöhe (m) | 300 | 300 | 300 | |
| Motordrehzahl (U / min) | 1420 | 1420 | 1420 | |
| Spannung (v) 3PHASEN | 220V / 380V / 415V | 220V / 380V / 415V | 220V / 380V / 415V | |
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our abgehängte Arbeitsplattform, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.