ZLP500 ZLP630 Rope Suspended Platform
ZLP500 ZLP630 Rope Suspended Platform is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references zlp 500, ZLP 630. These values should be confirmed against the final supplied configuration and destination power supply.

ZLP 500 LP 630用於建築的臨時懸掛鋼絲繩平台
我們的工廠:
上海成功國際貿易有限公司成立於2008年,是一家專業從事電氣懸浮研究,開發和生產的高新技術企業。
平台,建築起重機等各種施工設備。我們的產品質量專業,價格優惠,交貨快捷。我們可以根據您的要求定制。

應用:
1.清理和維護高層建築的外牆。
2.外牆的裝飾,裝飾和翻新。
3,高層建築外牆安裝工程及其他施工工作。
4.船舶,大型塔,橋樑,水壩和大型煙囪的空中作業。
5.安裝和維護高層建築電梯井道,造船業,海船,軍艦焊接維修。
產品規格:
| Property / Model No. | ZLP500 | ZLP630 | |
| 額定載荷(kg) | 500 | 630 | |
| 提升速度(m / min) | 9〜11 | 9〜11 | |
| 電機功率(kw) | 2×1.5 50HZ / 60HZ | 2×1.5 50HZ / 60HZ | |
| 制動扭矩(Km) | 16 | 16 | |
| 鋼絲繩角度調節範圍(°) | 3° - 8° | 3° - 8° | |
| 兩根鋼絲繩之間的距離(mm) | ≤100 | ≤100 | |
| 前梁額定伸長率(mm) | 1500 | 1500 | |
| 暫停平台 | 鎖定 | 鋁合金 | 鋁合金 |
| Nr.Of平台機架 | 單機架 | 單機架 | |
| Nr.Of平台 | 2 | 3 | |
| L×W×H(毫米) | (2000×2)×690×1300 | (2000×3)×690×1300 | |
| 重量(kg) | 350公斤 | 375公斤 | |
| 懸挂機制(kg) | 2×175公斤 | 2×175公斤 | |
| 配重(kg)可選 | 25×30支 | 25×36顆 | |
| 鋼絲繩直徑(mm) | 8.3 | 8.3 | |
| 最大提升高度(m) | 300 | 300 | |
| 電機轉速(r / min) | 1420 | 1420 | |
| 電壓(v)3PHASES | 220V / 380V / 415V | 220V / 380V / 415V | |
主要成分:

填料:


Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our 繩索懸掛平台, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.
