Mast Climbing and Mobile Elevated Work Platform
Mast Climbing and Mobile Elevated Work Platform is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The final platform length, rated load, electrical supply and suspension arrangement should be confirmed for the actual project.
桅杆攀爬懸掛式工作平台/移動式高架工作平台
說明
應用：
1.清潔和維護高層建築的外牆。
2.外牆的塗裝，裝飾和翻新。
3，高層建築外牆安裝工程及其他施工工作。
4.船舶，大型塔，橋樑，水壩和大型煙囪的空中作業。
5.安裝和維護高層建築電梯井道，造船業，海船，軍艦焊接維修。
技術參數
| 物業型號 | ZLP500 | |
| 額定載荷（kg） | 500 | |
| 提升速度（m / min） | 9〜11 | |
| 電機功率（kw） | 2×1.5 50HZ / 60HZ | |
| 制動扭矩（Km） | 16 | |
| 鋼絲繩角度調節範圍（°） | 3° - 8° | |
| 兩根鋼絲繩之間的距離（mm） | ≤100 | |
| 前梁額定伸長率（mm） | 1500 | |
| 暫停平台 | 鎖定 | 鋁合金 |
| Nr.Of平台機架 | 單機架 | |
| Nr.Of平台 | 2 | |
| L×W×H（毫米） | （2500×2）×690×1300 | |
| 重量（kg） | 375公斤 | |
| 懸挂機制（kg） | 2×175公斤 | |
| 配重（kg）可選 | 25×30支 | |
| 鋼絲繩直徑（mm） | 8.3 | |
| 最大提升高度（m） | 300 | |
| 電機轉速（r / min） | 1420 | |
| 電壓（v）3PHASES /單相 | 220V / 380V / 415V，50 / 60Hz （定制） | |
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our 暫停工作平台, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.