Aluminum 7.5m Suspended Working Platform

Aluminum 7.5m Suspended Working Platform

Aluminum 7.5m Suspended Working Platform is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references 7.5m, 1.8kw. These values should be confirmed against the final supplied configuration and destination power supply.

高層清洗設備,牆壁抹灰機

7.5米鋁製懸掛式繩索平台2 X 1.8kw動力穩定性能

說明:


銷式懸掛式工作平台易於拆卸和組合。它可以提高工人的工作效率。

應用:

1.高層建築:外牆裝飾,施工,幕牆安裝和外牆

外牆組件,修理,檢查,維護和清潔。

2.大型項目:大型水箱,煙囪,水壩,橋樑的建設,維修和保養,

井架。

3.大型船舶:焊接,清潔和噴漆。

廣告牌:高層建築的安裝廣告牌。

技術參數


型號。ZLP800
額定載荷(kg)800
提升速度(m / min)8〜10
電機功率(kw)2×1.8 50HZ / 60HZ
制動扭矩(Km)16
鋼絲繩角度調節範圍(°)3° - 8°
兩根鋼絲繩之間的距離(mm)≤100
前梁額定伸長率(mm)1500
暫停平台鎖定鋁合金
Nr.Of平台機架單機架
Nr.Of平台3
L×W×H(毫米)(2500×3)×690×1180
重量(kg)410公斤
懸挂機制(kg)2×175公斤
配重(kg)可選25×40PCS
鋼絲繩直徑(mm)8.6
最大提升高度(m)300
電機轉速(r / min)1420
電壓(v)3PHASES / SINGLE PHASE220V / 380V / 415V,50 / 60Hz(定制)

有競爭力的優勢:


1.絕對保證高空作業時的生命安全

一旦懸掛平台傾斜或鋼絲繩從提昇機中滑出,安全鎖立即緊固鋼絲繩;電控系統設計有漏電保護,過熱保護,電流過載保護和製動停止;

優質鋼絲繩,安全繩和電纜。

2.性能穩定:平穩升降

3.模塊化設計。易於拆卸,組裝操作和維護。

4.提升高度可根據要求調整(最大300米)

5.工作電壓和頻率可調(220V / 380V / 415V等)

6.特殊用途的懸浮平台可定制(圓形,L形,U形等)

7.專業品質,有競爭力的價格,快捷的交貨,良好的服務。

詳細的產品描述


額定載荷:800kg
提升速度:8-10
最大提升高度:300米
電機功率:2 X 1.8kw
鋼絲直徑:8.6mm
配重:25 X 40pcs

Configuration and Applications

Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.

Project Information Required

  • Building height and required working length
  • Workers, tools and material load
  • Voltage, phase and frequency
  • Roof parapet, suspension beam and counterweight conditions

Review our 暫停工作平台, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.