L-shaped Suspended Working Platform for Facade Painting
L-shaped Suspended Working Platform for Facade Painting is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references ZLP630, ZLP800, ZLP1000. These values should be confirmed against the final supplied configuration and destination power supply.
Keluli dicat / Hot Galvanized / Aluminium ZLP630 / ZLP800 / ZLP1000 L Berbentuk Platform Tergantung Untuk Lukisan Dinding
Peranti Standard: 2 keping angkat, 2 keping kunci keselamatan, 1 keping kotak kawalan elektrik, 4 gulung tali dawai keluli, 1 gulung tali keselamatan, 1 gulung kabel, berat kontra.
Peranti Alternatif: Tembok melawan penggelek, mekanisme penggantungan roda-roda. Beban beban terputus, peranti anti bergoyang, penggulung rod dawai, sambungan, bumbung platform, dan sebagainya.
| Model No. | ZLP630 | ZLP800 | ZLP1000 | |
| Beban undian (kg) | 630 | 800 | 1000 | |
| Kelajuan mengangkat (m / min) | 9 ~ 11 | 8 ~ 10 | 8~10 | |
| Kuasa motor (kw) | 2 × 1.5 50HZ / 60HZ | 2 × 1.8 50HZ / 60HZ | 2 × 2.2 50HZ / 60HZ | |
| Tayar brek (Km) | 16 | 16 | 16 | |
| Pelarasan sudut tali keluli (°) | 3 ° - 8 ° | 3 ° - 8 ° | 3 ° - 8 ° | |
| Jarak antara dua tali keluli (mm) | ≤100 | ≤100 | ≤100 | |
| Kelebihan rasuk depan (mm) | 1500 | 1500 | 1500 | |
| Platform penggantungan | Mengunci | Aloi aluminium | Aloi aluminium | Aloi aluminium |
| Nr.Of rak platform | Rak tunggal | Rak tunggal | Rak tunggal | |
| Nr.Of platform | 3 | 3 | 3 | |
| L × W × H (mm) | (2000 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | |
| Berat (kg) | 375 Kg | 410 Kg | 455kg | |
| Mekanisme penangguhan (kg) | 2 × 175 Kg | 2 × 175 Kg | 2 × 175 Kg | |
| Kaunter berat (kg) pilihan | 25 × 36pcs | 25 × 40pcs | 25 × 44pcs | |
| Diameter tali keluli (mm) | 8.3 | 8.6 / 9.1 | 8.6 / 9.1 | |
| Ketinggian Pengangkat Maksimum (m) | 300 | 300 | 300 | |
| Kelajuan putaran motor (r / min) | 1420 | 1420 | 1420 | |
| Voltan (v) 3PHASES | 220V / 380V / 415V | 220V / 380V / 415V | 220V / 380V / 415V | |
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our platform kerja digantung, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.