L-shaped Suspended Working Platform for Facade Painting

L-shaped Suspended Working Platform for Facade Painting

L-shaped Suspended Working Platform for Facade Painting is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references ZLP630, ZLP800, ZLP1000. These values should be confirmed against the final supplied configuration and destination power supply.

Factory-price-zlp800-لوازم آرایشی و بهداشتی-گوندولا برای ساخت و ساز

فولاد رنگی / گالوانیزه / آلومینیوم ZLP630 / ZLP800 / ZLP1000 L بستر بستر پلاستیکی برای نقاشی دیواری

دستگاه استاندارد: 2 عدد بالابر، 2 عدد قفل ایمنی، 1 عدد جعبه کنترل الکتریکی، 4 رول سیم طناب فولادی، 1 رول طناب ایمنی، 1 رول کابل، وزن مقطع.

دستگاه جایگزین: دیوار در برابر غلطک، ساز و کار تعلیق wheel.over بار قطع، دستگاه anti swaying، سیم مفتول سیم، extensions، سقف پلت فرم، و غیره

مدل شماره ملکZLP630ZLP800ZLP1000
بار بار (کیلوگرم)6308001000
سرعت بالا بردن (m / min)9 ~ 118 ~ 108~10
قدرت موتور (کیلووات)2 × 1.5 50HZ / 60HZ2 × 1.8 50HZ / 60HZ2 × 2.2

50HZ / 60HZ

گشتاور ترمز (کیلومتر)161616
محدوده تنظیم طناب فولادی (°)3 درجه - 8 درجه3 درجه - 8 درجه3 درجه - 8 درجه
فاصله بین دو طناب فولادی (میلی متر)≤100≤100≤100
عرض قطر جلو پرتو (میلی متر)150015001500
بستن پلت فرمقفل کردنآلیاژ آلومینیومآلیاژ آلومینیومآلیاژ آلومینیوم
رکورد شماره پلاکرکورد تکرکورد تکرکورد تک
پلت فرم No333
L × W × H (میلی متر)(2000 × 3) × 690 × 1300(2500 × 3) × 690 × 1300(2500 × 3) × 690 × 1300
وزن (کیلوگرم)375 کیلوگرم410 کیلوگرم455 کیلوگرم
مکانیزم تعلیق (کیلوگرم)2 × 175 کیلوگرم2 × 175 کیلوگرم2 × 175 کیلوگرم
وزن (کیلوگرم) اختیاری است25 × 36 پیکسل25 × 40 پیکسل25 × 44 پیکسل
قطر طناب فولادی (میلی متر)8.38.6 / 9.18.6 / 9.1
حداکثر ارتفاع بلند کردن (متر)300300300
سرعت چرخش موتور (r / min)142014201420
ولتاژ (V) 3 فاز220V / 380V /

415V

220V / 380V /

415V

220V / 380V /

415V

L-shaped Suspended Working Platform for Facade Painting - image 2
L-shaped Suspended Working Platform for Facade Painting - image 3

 

Configuration and Applications

Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.

Project Information Required

  • Building height and required working length
  • Workers, tools and material load
  • Voltage, phase and frequency
  • Roof parapet, suspension beam and counterweight conditions

Review our پلت فرم کار معلق, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.