Aluminum Three-phase ZLP630 Suspended Working Platform
Aluminum Three-phase ZLP630 Suspended Working Platform is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references zlp630, ZLP800, 100m, 150m, 200m, 300m, 208 v, 60hz. These values should be confirmed against the final supplied configuration and destination power supply.
208 V / 60HZ Tre Faser 100m, 150m, 200m, osv. Aluminium Alloy ZLP630 Suspended Cradle
SUCCESS suspended platform ( suspended cradle , suspended gondola ) is used for the people who work at height. Safety is the major concern.
Vores rebophængte platformsystemer er ikke kun effektive, men også fundet at være meget overkommelige.
Ansøgning
| Oplysninger | Teknisk Parameter | ||
| Model | ZLP630 | ZLP800 | |
| Kabel / Wire reb længde | Standard 100m, 300m højst | ||
| Nominel belastning (kg) | 630 | 800 | |
| Løftehastighed (Mtrs / min) | 9 – 11 m/min ( + / – 0.5) | 8 – 10 m/min ( + / – 0.5) | |
| Længde på platform (M) | 6.0 | 7.5 | |
| Maksimale dimensioner af platformen (LXWXH) | (2,0mx 3) X 0,69 X 1,3 | (2,5mx3) x 0,69 x 1,3 | |
| Stålrørdiameter | Ф8.3mm | φ8.6mm /9.1mm | |
| Hejse | Strøm | 1,5 KW * 2 | 1.8KW * 2 |
| Spænding | 380V / 208V / 220V / 415V / 440V; 50HZ / 60HZ; 3P / enkelt fase | ||
| Sikkerhedslås | Tilladelse kraft af virkning | 30 KN | |
| Låsekabelvinkel | 3 ° ~ 8 ° | ||
| Suspension mekanisme Hotgalvaniseret | Front beam overhæng | 0,5 ~ .1.7m | |
| Støtte justerbar højde | 1,15 ~ 1,75 m | ||
| kontravægt | 900 kg | 1000 kg | |
| suspension mekanisme | Inkluderet | ||
| Anti-svingende enhed | Alternativ | ||
| Indlæs celle med digitalt display | Alternativ | ||
| Schneider kontaktorer | Inkluderet | ||
| modvægt | Alternativ | ||
| Overhead Tag | Alternativ | ||
| Wall Rollers | Inkluderet | ||
| Fjernbetjening | Inkluderet | ||
| Tilpassede klapper til opsamling af affald | Alternativ | ||
| Tilpasset udvidelse | Alternativ | ||
| Inkluderet sikkerhedsudstyr: 1.Sikkerhedslås-Anti-vippe 2.Sikkerhedstape Nylon 18mm (livsledning) med faldafbryder-01 nr. Med hver enhed 3.Centrifugal hastighedsbegrænser 4.Elektromagnetisk bremse manuel frigivelse, 5.Over hoist / Top limit switch 6.Over nuværende / beskyttelsesrelæ 7.Engangstop | |||
| Type af materiale | stålmalet, varmgalvaniseret, aluminiumslegering | ||
Detaljeret produktbeskrivelse
Materiale: Aluminiumlegering
Platformlængde: 6m
Modvægt: 900 kg
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our ophængt arbejdsplatform, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.