L-shaped Suspended Working Platform for Facade Painting
L-shaped Suspended Working Platform for Facade Painting is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references ZLP630, ZLP800, ZLP1000. These values should be confirmed against the final supplied configuration and destination power supply.
Steel Gipinta / Mainit nga Galvanized / Aluminum ZLP630 / ZLP800 / ZLP1000 L Nag-umol Nausab nga Plataporma Kay Wall Painting
Standard Device: 2 pcs nga hoist, 2 pcs nga safety lock, 1 pc of electric control box, 4 rolls of steel wire rope, 1 roll of safety rope, 1 roll of cable, counter weight.
Ang alternatibong himan: Ang mga ligid batok sa mga rollers, suspensyon nga mekanismo nga mga wheels.over load giputol, anti-swaying device, wire rod winder, mga extension, plataporma nga atop, ug uban pa.
| Modelong Kabag-ohan. | ZLP630 | ZLP800 | ZLP1000 | |
| Rated nga load (kg) | 630 | 800 | 1000 | |
| Pagbayaw speed (m / min) | 9 ~ 11 | 8 ~ 10 | 8~10 | |
| Ang gahum sa motor (kw) | 2 × 1.5 50HZ / 60HZ | 2 × 1.8 50HZ / 60HZ | 2 × 2.2 50HZ / 60HZ | |
| Brake torque (Km) | 16 | 16 | 16 | |
| Steel rope angle adjusting range (°) | 3 ° - 8 ° | 3 ° - 8 ° | 3 ° - 8 ° | |
| Ang gilay-on tali sa duha ka pisi nga bakal (mm) | ≤100 | ≤100 | ≤100 | |
| Gikutgo nga hugpong sa atubangan nga poste (mm) | 1500 | 1500 | 1500 | |
| Nagpalayo nga plataporma | Pagtipig | Aluminum alloy | Aluminum alloy | Aluminum alloy |
| Dili. Sa plataporma | Single rack | Single rack | Single rack | |
| Dili. Sa plataporma | 3 | 3 | 3 | |
| L × W × H (mm) | (2000 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | |
| Timbang (kg) | 375 Kg | 410 Kg | 455kg | |
| Pagdugtong nga mekanismo (kg) | 2 × 175 Kg | 2 × 175 Kg | 2 × 175 Kg | |
| Ang timbang (kg) nga opsyonal | 25 × 36pcs | 25 × 40pcs | 25 × 44pcs | |
| Diametro sa pisi nga bakal (mm) | 8.3 | 8.6 / 9.1 | 8.6 / 9.1 | |
| Pagtaas sa Max (m) | 300 | 300 | 300 | |
| Gilis sa rotasyon sa motor (r / min) | 1420 | 1420 | 1420 | |
| Boltahe (v) 3PHASES | 220V / 380V / 415V | 220V / 380V / 415V | 220V / 380V / 415V | |
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our gisuspinde nga nagtrabaho plataporma, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.