300m Rope Suspended Platform for Facade Painting

300m Rope Suspended Platform for Facade Painting

300m Rope Suspended Platform for Facade Painting is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references 300m. These values should be confirmed against the final supplied configuration and destination power supply.

 

300m Rope Suspended Platform for Facade Painting

Taas nga Safety Rope Gisuspende ang Platform nga Pagtaas sa Gitas-on nga 300M alang sa Pagpintal

Mga paghulagway:

Mga aplikasyon:

1. Paglimpyo ug pagmentinar sa gawas sa bongbong sa taas nga building.

2. Pagdibuho, dekorasyon ug pag-ayo sa mga bungbong sa gawas.

3. Mga proyekto sa pag-instalar ug uban pang pagtukod nga pagtrabaho sa mga pang-gawas nga mga bungbong sa taas nga building.

4. Aerial nga pagtrabaho sa barko, dako nga tore, tulay, dam ug dagkong mga panghaw.

5. Pag-instalar ug pagmentinar alang sa high-rise building elevator hoistway, industriya sa paghimo sa barko, barko nga sakayan, pag-atiman sa mga barko sa barko.

300m Rope Suspended Platform for Facade Painting - image 2

Teknikal nga Parameter

 

Model No.ZLP1000
Rated nga load (kg)1000
Pagbayaw speed (m / min)8 ~ 10
Ang gahum sa motor (kw)2 × 2.2, 50HZ / 60HZ
Brake torque (Km)16
Steel rope angle adjusting range (°)3 ° - 8 °
Ang gilay-on tali sa duha ka pisi nga bakal (mm)≤100
Gikutgo nga hugpong sa atubangan nga poste (mm)1500
Pagsalig nga PlatformPagtipigAluminum alloy
Dili. Sa platapormaSingle rack
Dili. Sa plataporma3
L × W × H (mm)(2500 × 3) × 690 × 1180
Timbang (kg)455 Kg
Pagdugtong nga mekanismo (kg)2 × 175 Kg
Ang timbang (kg) nga opsyonal25 × 44pcs
Diametro sa pisi nga bakal (mm)8.6
Pagtaas sa Max (m)300
Gilis sa rotasyon sa motor (r / min)1420
Voltage (v) 3PHASES / SINGLE PHASE220V / 380V / 415V, 50 / 60Hz (customized)

Pag-impake:

300m Rope Suspended Platform for Facade Painting - image 3
300m Rope Suspended Platform for Facade Painting - image 4

Mga bentaha nga bentaha:

1. Hingpit nga magarantiya ang kaluwasan sa kinabuhi panahon sa pagtrabaho sa Aerial

Ang lock sa safety mopadali sa lubid sa puthaw sa diha nga ang gisuspinde nga plataporma nga tilts o ang puthaw nga lubid mogawas gikan sa hoist; Ang sistema sa pagkontrol sa kuryente gidisenyo nga adunay proteksyon sa leakage, sobra nga kainit nga proteksyon, kasamtangang proteksyon sa overload ug pagbabag sa preno;

Maayong kalidad nga steel wire rope, safety rope ug cable.

2. Maayo nga pasundayag: ipataas ug ipaubos ang hapsay

3. Modular design. Sayon nga mag-disassemble, magtapok ug magpadayon.

4. Ang pagtaas sa gitas-on mahimong mausab sumala sa gikinahanglan (Maximum 300 Metros)

5. Ang pagtrabaho nga boltahe ug kadugayon mahimong mausab (220V / 380V / 415V ug uban pa)

6. Ang gisuspinde nga plataporma alang sa espesyal nga paggamit mahimong ipasibo (circular, L nga porma, U nga porma, ug uban pa)

7. Propesyonal nga kalidad, kompetetibo nga presyo, paspas nga pagpadala, maayong serbisyo.

Configuration and Applications

Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.

Project Information Required

  • Building height and required working length
  • Workers, tools and material load
  • Voltage, phase and frequency
  • Roof parapet, suspension beam and counterweight conditions

Review our gihigot ang lubid nga plataporma, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.