L-shaped Suspended Working Platform for Facade Painting
L-shaped Suspended Working Platform for Facade Painting is a temporary access configuration for facade construction, cleaning, painting or maintenance where a roof-suspended system is appropriate. The existing specification references ZLP630, ZLP800, ZLP1000. These values should be confirmed against the final supplied configuration and destination power supply.
Staalverf / Warm gegalvaniseerde / Aluminium ZLP630 / ZLP800 / ZLP1000 L Gevormde Opgeskorte Platform Vir Muurverf
Standaard Toestel: 2 stuks hysbak, 2 stuks veiligheidslot, 1 stuks elektriese beheerkas, 4 rolle staaldraad, 1 rol veiligheidstou, 1 rol kabel, teengewig.
Alternatiewe Toestel: Muur teen rollers, skroefmeganisme wiele. Oorbelasting, Anti-swaaiapparaat, Walsdraaier, Uitbreidings, Platformdakke, ens.
| Eiendom Model Nr. | ZLP630 | ZLP800 | ZLP1000 | |
| Gewaardeerde vrag (kg) | 630 | 800 | 1000 | |
| Lyfspoed (m / min) | 9 ~ 11 | 8 ~ 10 | 8~10 | |
| Motoriese krag (kw) | 2 × 1,5 50 Hz / 60 Hz | 2 × 1.8 50 Hz / 60 Hz | 2 × 2.2 50HZ / 60HZ | |
| Remmoment (Km) | 16 | 16 | 16 | |
| Staal touwhoek aanpassingsbereik (°) | 3 ° - 8 ° | 3 ° - 8 ° | 3 ° - 8 ° | |
| Afstand tussen twee staal tou (mm) | ≤100 | ≤100 | ≤100 | |
| Gegradeerde rek van die voorste balk (mm) | 1500 | 1500 | 1500 | |
| Opskortende platform | sluit | Aluminium | Aluminium | Aluminium |
| Nr. Van platform rak | Enkelrek | Enkelrek | Enkelrek | |
| Nr.Of platform | 3 | 3 | 3 | |
| L × W × H (mm) | (2000 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | (2500 × 3) × 690 × 1300 | |
| Gewig (kg) | 375 Kg | 410 kg | 455kg | |
| Opskortingsmeganisme (kg) | 2 × 175 Kg | 2 × 175 Kg | 2 × 175 Kg | |
| Teengewig (kg) opsioneel | 25 × 36pcs | 25 × 40pcs | 25 × 44pcs | |
| Diameter van staal tou (mm) | 8.3 | 8.6 / 9.1 | 8.6 / 9.1 | |
| Max Hefhoogte (m) | 300 | 300 | 300 | |
| Motorrotasie spoed (r / min) | 1420 | 1420 | 1420 | |
| Spanning (v) 3FASES | 220V / 380V / 415V | 220V / 380V / 415V | 220V / 380V / 415V | |
Configuration and Applications
Model selection should consider the complete working load, platform section arrangement, building height, facade geometry and operating environment. A higher model rating does not allow the platform length or carried load to exceed the approved system limits.
Project Information Required
- Building height and required working length
- Workers, tools and material load
- Voltage, phase and frequency
- Roof parapet, suspension beam and counterweight conditions
Review our opgeskorte werkplatform, browse the product article library, or send the project requirements to Shanghai Success Construction International Trade Co., Ltd. Site planning should follow applicable local regulations and the OSHA suspended scaffold requirements.